How to install the automatic winding filter? – Nanjing Yixi Ou Ecolead

We often receive calls to inquire about the on-site installation method of the wound filter. So here we hope to explain and introduce some relevant knowledge about the on-site installation of the automatic winding filter.

Ecolead Nanjing Ecolead

The installation method of the automatic roller shutter filter can be divided into

1.   Embedded

2.   External

When ordering an automatic winding filter, you should determine which installation method to choose.

If you choose the built-in type , you must make sure that the opening size of the on-site wall is about 30-50mm larger than the size of the automatic winding filter. We must make sure to reserve a gap of 30-50mm, so as to ensure that the winding filter can be smoothly embedded in the hole of the wall. Generally, if you choose the embedded installation, there is no need to provide a fixed bracket for the winding filter. Ecolead Nanjing Ecolead

If you choose the externally lean type, you must make sure that the opening size of the on- site wall is less than about 80-100mm than the size of the automatic winding filter. The external type is to put the equipment close to the hole, and install it in the center. Generally, if you choose an external installation, you need to provide a fixed bracket for the winding filter. Ecolead Nanjing Ecolead

In both installation methods, angle iron, channel steel, etc. can be connected to the column of the equipment and then fixed on the wall, and the gaps around it can be sealed with glue.

The choice of built-in or externally mounted installation depends on the construction conditions on site, and it is difficult to evaluate which installation method has advantages. I hope that the detailed explanation of this article can help you all.